Page 5 - IR Coating EN

Metal finish coating
Coating on 3-D cylinders
Coating of compressor housings Aluminium profiles
Coil coating
5
Booster
Production bottlenecks often occur as a result of tougher production demands, where the existing drying system can no longer keep pace. This can often be solved by an infrared booster section, which is positioned in front of the existing drying system. The booster section rapidly brings the product up to temperature allowing line speeds to be increased accordingly.
For some products this can equate to savings of up to 50% of the time required to dry or cure the coating.
Powder Coatings
Infrared heating technology can significantly speed up the melting of powder coatings. Powder is a very good absorber of infrared energy which allows the powder to flow or cure in times that are significantly shorter than with conventional ovens.
With no air circulation dust inclusions are removed and quality problems arising from powder being “blown” of the surface of the part are eliminated. Rapid melting of the powder improves the quality of finish and allows line speed to be increased.
Foto: SAS
Foto: Weisstechnik Foto: Chesterfield Cylinders Foto: SSK
Foto: Piesslinger